2023+ Hyundai Ioniq 6 | Visor Decals | 2 Piece

Application Solution: 4 Drops of Dish Soap: 1 Oz of water.

Mix the solution in a separate container and pour it in to the supplied bottle. You may need to refill the bottle if you have several items to install so keep the solution handy.

1. Thoroughly wash your hands.
2. Roll film in opposite direction of packing to flatten it out and make it easier to work with. Waves and light creases are completely normal and will NOT be visible when applied.
3. Fill a cup with water and a add Dish soap or Baby Soap per the recipe above. Soap is not optional.
4. Fill the included bottle with the soap/water mix.  Note: We supplied a small bottle due to shipping restrictions. It will be easier to use a larger one if possible.
5. Using the solution, thoroughly clean the display and surrounding area to remove any fingerprints, dust, or dirt from the screen and bezel.
6. If you have something very stubborn, use the supplied alcohol wipe to assist in cleaning that area.
7. Dry the screen with the supplied microfiber cloth. Lightly brush any lint or dust off, that may have been left behind.
8. Spray your fingertips with water to avoid getting any prints on the back of the film. Keep your hands wet to protect the film from oils.
9. Peel the film from the backing and spray the sticky side as you go. Be generous with the soapy water mix, it will help you center the film to the screen. It should be wet but not dripping.
10. Spray the screen with the solution, then place the film on the screen with no pressure. You should be able to slide the film around. Note: If the screen protector is not easy to slide and you feel it is sticking to the display, add a few more drops of soap to your bottle while the screen protector is resting on your screen. Remove the screen protector and spray the screen with the new solution. It will now slide freely.
11. Align the film on the screen. Make sure any gaps are equal all the way around.
12. Once you are happy with the alignment, wrap the microfiber towel around the supplied plastic card. Gently press on the film with your finger tips to keep it from moving, Then Using the plastic card, begin pressing the film to the screen starting from the top and working your way down.
13. You want to work the screen in rows starting from the middle.
14. The goal is to press the solution out from between the screen and the film allowing the adhesive to work.
15. Use the microfiber cloth to wipe any water that has been released. Be very cautious while wiping the film dry. It will be in a very delicate state until all the moisture has been removed/evaporated. Streaks and/or small bubbles under the film is normal and will go away with time. Alternatively, WET FINGERS, peel back affected half, spray and re-squeegee.Touch Screen may become unresponsive until moisture has completely evaporated.